Results 1 to 4 of 4

Thread: ThinAir problems back

  1. #1
    Super Moderator Petr Schreiber's Avatar
    Join Date
    Aug 2005
    Location
    Brno - Czech Republic
    Posts
    7,128
    Rep Power
    732

    ThinAir problems back

    Hi Roberto,

    the odd behavior of thinAir is back - again during opening template or trying to save it.
    I post here complete tracelog ( see attachement ), as I think it is interesting to watch it never exited with 0, always with 20, 2330 or 61536.

    Interesting part is for example the following:
    10-29-2008 20:37:04 Program entry, version 1.7.0.0
    10-29-2008 20:37:04 Loaded address 0x00460EAA
    10-29-2008 20:37:04 Requested stack size 0x00100000
    10-29-2008 20:37:04 Stack pointer 0x0013FD68
    10-29-2008 20:37:04 Stack base pointer 0x0013FF00
    10-29-2008 20:37:04 Running on Windows XP Build 2600 (Service Pack 2)
    10-29-2008 20:37:04 Load library
    10-29-2008 20:37:04 Load setting from ini Entry
    10-29-2008 22:27:18 Program entry, version 1.7.0.0
    10-29-2008 22:27:18 Loaded address 0x00460EAA
    10-29-2008 22:27:18 Requested stack size 0x00100000
    10-29-2008 22:27:18 Stack pointer 0x0013FD68
    10-29-2008 22:27:18 Stack base pointer 0x0013FF00
    10-29-2008 22:27:18 Running on Windows XP Build 2600 (Service Pack 2)
    10-29-2008 22:27:18 Load library
    10-29-2008 22:27:18 Load setting from ini Entry
    11-02-2008 15:50:41 Program entry, version 1.7.0.0
    11-02-2008 15:50:41 Loaded address 0x00460EAA
    11-02-2008 15:50:41 Requested stack size 0x00100000
    11-02-2008 15:50:41 Stack pointer 0x0013FD68
    11-02-2008 15:50:41 Stack base pointer 0x0013FF00
    11-02-2008 15:50:41 Running on Windows XP Build 2600 (Service Pack 2)
    11-02-2008 15:50:41 Load library
    11-02-2008 15:50:41 Load setting from ini Entry
    11-02-2008 22:39:55 Program entry, version 1.7.0.0
    11-02-2008 22:39:55 Loaded address 0x00460EAA
    11-02-2008 22:39:55 Requested stack size 0x00100000
    11-02-2008 22:39:55 Stack pointer 0x0013FD68
    11-02-2008 22:39:55 Stack base pointer 0x0013FF00
    11-02-2008 22:39:55 Running on Windows XP Build 2600 (Service Pack 2)
    11-02-2008 22:39:55 Load library
    11-02-2008 22:39:55 Load setting from ini Entry
    11-03-2008 16:34:26 Program entry, version 1.7.0.0
    11-03-2008 16:34:26 Loaded address 0x00460EAA
    11-03-2008 16:34:26 Requested stack size 0x00100000
    11-03-2008 16:34:26 Stack pointer 0x0013FD68
    11-03-2008 16:34:26 Stack base pointer 0x0013FF00
    11-03-2008 16:34:26 Running on Windows XP Build 2600 (Service Pack 2)
    11-03-2008 16:34:26 Load library
    11-03-2008 16:34:26 Load setting from ini Entry
    11-04-2008 08:42:27 Program entry, version 1.7.0.0
    11-04-2008 08:42:27 Loaded address 0x00460EAA
    11-04-2008 08:42:27 Requested stack size 0x00100000
    11-04-2008 08:42:27 Stack pointer 0x0013FD68
    11-04-2008 08:42:27 Stack base pointer 0x0013FF00
    11-04-2008 08:42:27 Running on Windows XP Build 2600 (Service Pack 2)
    11-04-2008 08:42:27 Load library
    11-04-2008 08:42:27 Load setting from ini Entry
    11-04-2008 09:15:03 Program entry, version 1.7.0.0
    11-04-2008 09:15:03 Loaded address 0x00460EAA
    11-04-2008 09:15:03 Requested stack size 0x00100000
    11-04-2008 09:15:03 Stack pointer 0x0013FD68
    11-04-2008 09:15:03 Stack base pointer 0x0013FF00
    11-04-2008 09:15:03 Running on Windows XP Build 2600 (Service Pack 2)
    11-04-2008 09:15:03 Load library
    11-04-2008 09:15:03 Load setting from ini Entry
    11-04-2008 09:15:48 Program entry, version 1.7.0.0
    11-04-2008 09:15:48 Loaded address 0x00460EAA
    11-04-2008 09:15:48 Requested stack size 0x00100000
    11-04-2008 09:15:48 Stack pointer 0x0013FD68
    11-04-2008 09:15:48 Stack base pointer 0x0013FF00
    11-04-2008 09:15:48 Running on Windows XP Build 2600 (Service Pack 2)
    11-04-2008 09:15:48 Load library
    11-04-2008 09:15:48 Load setting from ini Entry
    11-04-2008 16:21:01 Program entry, version 1.7.0.0
    11-04-2008 16:21:01 Loaded address 0x00460EAA
    11-04-2008 16:21:01 Requested stack size 0x00100000
    11-04-2008 16:21:01 Stack pointer 0x0013FD68
    11-04-2008 16:21:01 Stack base pointer 0x0013FF00
    11-04-2008 16:21:01 Running on Windows XP Build 2600 (Service Pack 2)
    11-04-2008 16:21:01 Load library
    11-04-2008 16:21:01 Load setting from ini Entry
    11-05-2008 21:28:29 Program entry, version 1.7.0.0
    11-05-2008 21:28:29 Loaded address 0x00460EAA
    11-05-2008 21:28:29 Requested stack size 0x00100000
    11-05-2008 21:28:29 Stack pointer 0x0013FD68
    11-05-2008 21:28:29 Stack base pointer 0x0013FF00
    11-05-2008 21:28:29 Running on Windows XP Build 2600 (Service Pack 2)
    11-05-2008 21:28:29 Load library
    11-05-2008 21:28:29 Load setting from ini Entry
    11-05-2008 21:46:30 Program entry, version 1.7.0.0
    11-05-2008 21:46:30 Loaded address 0x00460EAA
    11-05-2008 21:46:30 Requested stack size 0x00100000
    11-05-2008 21:46:30 Stack pointer 0x0013FD68
    11-05-2008 21:46:30 Stack base pointer 0x0013FF00
    11-05-2008 21:46:30 Running on Windows XP Build 2600 (Service Pack 2)
    11-05-2008 21:46:30 Load library
    11-05-2008 21:46:30 Load setting from ini Entry
    11-05-2008 22:42:10 Program entry, version 1.7.0.0
    11-05-2008 22:42:10 Loaded address 0x00460EAA
    11-05-2008 22:42:10 Requested stack size 0x00100000
    11-05-2008 22:42:10 Stack pointer 0x0013FD68
    11-05-2008 22:42:10 Stack base pointer 0x0013FF00
    11-05-2008 22:42:10 Running on Windows XP Build 2600 (Service Pack 2)
    11-05-2008 22:42:10 Load library
    11-05-2008 22:42:10 Load setting from ini Entry
    11-05-2008 22:42:15 Trace log flag enabled
    11-05-2008 22:42:20 Close frame window 5636410
    11-05-2008 22:42:20 Save Setting to ini Entry
    11-05-2008 22:42:20 Resetting position from-4,-4 to-4,-4
    11-05-2008 22:42:20 Resetting size from 1288,998 to 1288,998
    11-05-2008 22:42:20 Save Setting to ini Exit
    11-05-2008 22:42:20 Quit
    11-05-2008 22:42:20 Help unitialized
    11-05-2008 22:42:20 Library unloaded
    It seems to be in some loop for a while.


    Petr
    Attached Files Attached Files
    Learn 3D graphics with ThinBASIC, learn TBGL!
    Windows 10 64bit - Intel Core i5-3350P @ 3.1GHz - 16 GB RAM - NVIDIA GeForce GTX 1050 Ti 4GB

  2. #2

    Re: ThinAir problems back

    Peter:

    Just for info, the only problem I am having with the most recent release of ThinAir is as follows.

    When I click on FILE, NEW, NEW FILE and get the SELECT THE TEMPLATE window, if I then click on the USE EMPTY button before I maka a template choice, ThinAir crashes. Otherwise everything seem to wowk on my system (Windows-XP SP2). I can't seem to be able to create the same problem you are experiencing. Maybe the USE EMPTY button should be greyed out until a template choice is made.

    Don

    XPS 1710

  3. #3
    Super Moderator Petr Schreiber's Avatar
    Join Date
    Aug 2005
    Location
    Brno - Czech Republic
    Posts
    7,128
    Rep Power
    732

    Re: ThinAir problems back

    Hi Don,

    thanks for the info. Well, the same occurs for Use Empty for me too.
    The problem was not visible after fresh install, but after some time of use, thinAir converges to this behavior :'(


    Petr
    Learn 3D graphics with ThinBASIC, learn TBGL!
    Windows 10 64bit - Intel Core i5-3350P @ 3.1GHz - 16 GB RAM - NVIDIA GeForce GTX 1050 Ti 4GB

  4. #4
    thinBasic author ErosOlmi's Avatar
    Join Date
    Sep 2004
    Location
    Milan - Italy
    Age
    57
    Posts
    8,777
    Rep Power
    10

    Re: ThinAir problems back

    I too confirm both problems.

    Sometimes it cash when a new empty template is chosen.
    Sometimes it is able to open a new empty file, you can even work with it editing and so on, but crash when trying to save it.

    I think Roberto is working on it.
    Ciao
    Eros
    www.thinbasic.com | www.thinbasic.com/community/ | help.thinbasic.com
    Windows 10 Pro for Workstations 64bit - 32 GB - Intel(R) Xeon(R) W-10855M CPU @ 2.80GHz - NVIDIA Quadro RTX 3000

Similar Threads

  1. Problems / STAT problem back?
    By Petr Schreiber in forum Preview testing
    Replies: 1
    Last Post: 31-08-2008, 23:37

Members who have read this thread: 0

There are no members to list at the moment.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •